Minibrew Brewpacks are the recipe kits required to brew small-scale batches of home-brew beer using the Minibrew; a selection can be found in the shop.

You can find details about each recipe in our shop. However, these packs are sometimes out of stock and can't be found on our website. 

The brewing part on the base station always follows the same steps: mixing the malt, adding hops to the carousel, mashing, boiling and cooling. 
The fermentation part in the keg differs alot between recipes, so a schedule can be found below.

Brave Bird

The Brave Bird brings you back to the sunny and peaceful farmland with hints of grape coming from the hops and its brown-caramel color from the special malts. But the adventurous falcon wanted something extra and focussed its eyes on some spice, coriander gives the beer that extra punch to make every sip an adventure!

• Fermentation time: 14 days.
• Ready to drink: 14-16days (carbonation grade is up to personal preference).
• Abv: ~6%.

What's included? 

• 1x Mixed crushed malt (barley, wheat, rye, acidulated barley)
• 5x Boil ingredient bags (aroma hop pellets, bitter hop pellets, coriander seed)
• 1x Dryhop bag (aroma hop pellets)
• 1x Dry yeast package (Belle saison)

Fermentation schedule:

Primary:

1. Add the yeast into the keg
2. Add the dryhop bag contents into the keg;
3. Attach the airlock to the keg post (located in the middle of the keg lid);
4. Attach the trub container to the bottom of the keg.
5. The keg brings up the temperature from 25C to 35C over 3 days.

Conditioning 1: 

1. The keg controlls the temperature at 35C;
2. Remove the trub container and empty its contents;
3. Replace the trub container.

Secondary:

1. The keg controlls the temperature at 35C for 3 days;

Conditioning 2: 

1. The keg controlls the temperature at 35C;
2. Remove the trub container and empty its contents;
3. Replace the trub container.

Conditioning 3: 

1. The keg controlls the temperature at 5C for 5 days;
2. Remove the trub container and empty its contents.

Carbonation/Serving:

1. Attach a cartridge to the pressure regulator.
2. Attach a black ball lock connector to the regulator.
3. Mount the regulator on the keg post with CO2 text.
4. Open the regulator and wait 1 day.
5. Replace the cartridge and wait 1 more day.
6. Connect the tap to a black ball lock connector and attach it to the keg post with TAP text.
7. Release the pressure inside the keg by gently lifting the overpressure valve.
8. Pressure the keg to 5psi for a proper tapping flow and tap your beer!