Everything about pre-cleaning phased first steps before brewing
The rinse phase is a pre-cleaning step before the actual brewing starts. During this process, water is heated up and circulated through the base station and smart keg. This is important to make sure a brew can start with a clean sheet, mitigating in
The device will clean and rinse itself. This ‘’pre-cleaning’’ process takes about 30 min depending on your current tap water temperature. During this step the MiniBrew will heat up water, circulate it through the Smart keg and base station and cool i
At times, you may encounter an issue where the pump fails to prime itself during the rinse process. This can be resolved by manually priming the pump and ensuring proper water flow. Below are 5 simples step instructions to guide you through this proc
At times, you may encounter an issue where the app asks to put the keg on the base station, but it's already there. This can be resolved by wiggling around the keg so the pressure sensor in the base station finds your keg.